Description:
4G / Lte in-building Cell Booster / Amplifier Cell Booster 4G Lte Amplifier Repeater 700 is designed to solve problems of wak mobile signal, which is much cheaper than adding a new base station (BTS). Main operation of the repeaters are to receive lower-power signal from BTS via RF transmission and then transmit the amplified signal to the areas where network coverage is inadequate.And the mobile signal is also amplified and transmitted to the BTS via the opposite direction.
Main Features:
1, Output Power +43dBm for large coverage application;
2, High working gain as Min. 95dB;
3, Adopting filter with highly selectivity and low insertion loss eliminates interference between uplink and downlink;
4, RS232 ports provide links to laptop for local setting and monitoring by built in web interface;
5, Built in wireless modem (Option) for remote monitoring by SMS or GPRS;
6, Details repeater parameters and status can be monitoring by Control Panel, such as temperature, output power level, gain, ATT, return loss, VSWR etc;
7, Support upgrading firmware remotely by GPRS;
8, High gain linear power amplifier technique with reliable performance;
9, Weatherproof design for all-weather installation ;
| Items | B7 4G / Lte in-building Cell Booster/Amplifier Band7 Cell Booster 4G Lte Amplifier Repeater |
| Frequency Range | Uplink | 806-821MHz |
| Downlink | 851-866MHz |
| Output Power | Uplink | +37dBm |
| Downlink | +43dBm |
| Working Bandwidth | Various bandwidth is available upon request |
| Gain | Min. 95dB |
| AGC Control Range | Min 40dB (+/-2dB) |
| Gain Control Range | 31dB (1dB Step) |
| VSWR | < 1.5 |
| Ripple in Band | Max +/-1.5dB |
| Inter modulation attenuation | ≤-45dBc |
| Spurious Emissions | 9KHz-1GHz | Max -36dBm |
| 1GHz-12.75GHz | Max -30dBm |
| RF Connector | N-type Female |
| I/O Impedance | 50 ohm |
| Noise Figure | Max 5dB |
| Group Time Delay | Max 5µS |
| Temperature Range | -25 degree Celsius to +55 degree Celsius |
| Relative Humidity | Max 95% |
| MTBF | Min. 100,000 hrs |
| Power Supply | DC -48V / AC220V/110V (+/-15%), 50Hz/60Hz |
| NMS Monitor Function(Optional) | Real-time alarm for Door Status, Temperature, Power Supply, VSWR, Output Power, Gain, Uplink ATT, Downlink ATT and etc. |
| Remote Control Module(Optional) | RS232 + Wireless Modem + Chargeable Li-ion Battery |
Packing Details:
Standard Package
1) Signal Repeater (AC power cord EU standard/ US standard/ UK standard) 1PC
2) Installation kit 1PC
3) User manual 1PC
Recommended Accessories
1) Donor antenna: Outdoor Panel Antenna ( 12dBi, 824-960Mhz )
2) Service antenna: Omni Ceiling Antenna ( 3dBi,824-960MHz)
3) 1/2" RF cable with connecter ( Cable length optional)
4) Splitter, coupler
